What is Hydro Jet Drain Cleaning?

Hydro jetting is a plumbing method used to clean stubborn blockages in drains. When more than one blocked drain in the house is blocked, and sometimes a clogged snake can’t remove a clogged drain. Hydro Jet Drain cleaning provides an inexpensive alternative to unclogging the drains with heavy-duty chemicals or other plumbing tools. In addition, it’s more environmentally safe than other plumbing tools, such as plunging the pipes or using hydraulic power to blast them clean.


If your drain gets clogged somehow, don’t wait to hire a plumber – do it yourself. Hydro jet Drain cleaning is done using high-pressure water sent through a tubing system to the sewer line. Depending on the size of the blockage, the hydro-jet nozzle sprays a fine jet of water directly at the blockage, breaking up the concrete and suctioning out whatever’s stuck in the pipes. After breaking up the concrete, the drain and sewer lines are free to run clear and fresh.

To start the Hydro Jet Drain Cleaning Adelaide process, have a bucket or garden hose with cold water already inside available. The length of time you spend on hydro jet drain cleaning will depend on the size of the pipes involved, but you’ll need to break up the debris and dislodge it, if necessary. Large drains use a tractor-style vacuum that’s big enough to handle the job, while smaller pipes might require a stick-like tool to reach them. Keep your hands and clothing away from the pipes, as they could be dangerous and corroded. Always wear rubber gloves, goggles, and safety glasses, to keep yourself safe.

Once hydro jet drain cleaning has started on the blockage, wait about fifteen to twenty minutes to allow the machine to do its job. Then take another fifteen to twenty minutes to clear out any debris that is still left behind in your pipes. If your sewer lines are so damaged that you cannot clear the blockage all at once, try to work in small increments. You can’t remove an entire blockage of dirt at once. You may need to backtrack a few feet to clear the remaining dirt, depending on the severity of the blockage.

When your Hydro Jet Drain Cleaning Adelaide has done its job, take a look at the “drain field.” It consists of the combined volume of dirt, fallen debris, and anything else that might be clogging your sewer line. If there is an excessive amount of debris in your pipes, you may need a professional plumbing service to help clear it out. However, if the clog isn’t too severe, you can usually clear it out by slowly draining water through the pipes until the “drain field” is clear. This method can be a little bit time-consuming but can be very effective.

You should do one last thing before you call in the hydro jet drain cleaning service to make sure the rest of your house is free of debris and clogs. Using drain cleaners on your own toilet and kitchen sinks can be dangerous, so you want to make sure your bathroom and kitchen sink drain are clear before you start trying to clear out your drains. It can save you from a plumbing emergency.


If you have a problem with a blocked drain, don’t wait for the professional hydro jet drain cleaning company to arrive. Try cleaning out your pipes yourself first to see if you can fix the problem yourself. If you can, saving money will be much better than calling a plumber to help you deal with your clogged drain in the middle of the night. You can use your plunger, a garden hose, and some water to clear out whatever is clogging your sewer lines.

Before you call in the hydro jet drain cleaning professionals, ask yourself if you know where your clogs are. The main problem may not lie with your toilet or sink, and if you don’t realize that it’s the root cause of the problem, you’ll just be spinning your tires and wasting time. It’s best to get to the root cause of the clog and clear it out before you call in the professionals. In addition, remember that draining your sewer lines every so often to increase water pressure is also a good idea, especially since this increases the lifespan of your sewer lines.