Retaining walls are an excellent and practical way to increase the value of your home. They protect your home from storms, leaks, and other elements that can harm the structure. You also get to increase the value of your home by providing a protective barrier against potential future conditions.
While they are a great addition to any home, building retaining walls Sydney can be a challenge. One challenge with building a retaining wall is that you must know precisely what type of wall you want. The choice of materials for your fence can be confusing, which makes building one even more difficult.
There are many forms and types of retaining walls Sydney. The first thing you should know is the concept of slope. The idea of the hill can help you in several ways. The slopes of retaining walls often vary greatly. You may need to create a slope of twenty degrees to fifteen degrees. The first step in determining the slope of a retaining wall is to identify the maximum height at which the wall will be standing.
Keep in mind that most sloping walls will require excavation to reach their highest point. It is not as hard to figure out as it sounds. Begin by checking your local building codes. Make sure you find out how deep the excavation is, and then find the height you are comfortable with.
Once you know how far above the ground you are going to excavate, you can choose a wall with a similar slope. Using the guidelines from the local building codes, locate the slope of the wall you want. Next, find the slope of the retaining wall you will be building. Make sure that it is the same as your previous work.
You may be surprised to learn that your local building codes usually include parameters for the slope of retaining walls. If the slope of the wall you are working on is less than five degrees, then you don’t need to worry about figuring out how much of an excavation you will need.
Slopes higher than five degrees can require an excavation more than a hundred feet long. If you are going to have a sloping wall that is larger than fifty feet long, then you may want to consider purchasing the more expensive concrete slabs.
The shape of your wall is important, too. Many people choose to buy the most straightforward retaining wall possible, but this isn’t always the best option.
For instance, a simple design may not do the job for all situations. A slope that is five degrees might not be enough to support your house on its full configuration. You may need to add a wall that is higher than the original ones if the design of your home changes significantly.
Some people install a new retaining wall only when the original walls are worn or in bad condition. You may have a smaller job to do once a retaining wall becomes weak, so you will probably want to go ahead and replace the existing walls before you tear down your current wall.
By deciding to tear down a retaining wall, you are taking your home one step closer to a new, more attractive look. Taking the time to design and build a retaining wall can increase the value of your home, too. Visit http://www.retaining-wall-builder-sydney.com.au to get your project started.